MSM7xx Controllers Configuration Guide v6.4.0

• Vendor-specific
(Microsoft)
• Calling-Station-Id
• Class
◦ MSCHAP-Challenge
• Framed-IP-Address
◦ MSCHAP-Response
• NAS-Identifier
• NAS-Ip-Address
◦ MSCHAPv2-Response
• NAS-Port
• Vendor-specific (WISPr)
• NAS-Port-Type
◦ Location-Name
• User-Name
Accounting Response
◦ Location-ID
No attributes are
supported.
◦ Logoff-url
In the attribute descriptions, a string is defined as 1 to 253 characters.
Access request
Acct-Session-Id
(32-bit unsigned integer)
Random value generated per authentication by the controller.
Called-Station-Id
(string)
By default, this is set to the MAC address of the controller wireless/LAN port in IEEE format.
For example: 00-02-03-5E-32-1A. To use the MAC address of the Internet port, you must
edit the config file and change the setting of radius-called-station-id-port to WAN in the
<ACCESS-CONTROLLER> section.
Calling-Station-Id
(string)
The MAC address of the controller LAN port in IEEE format. For example:
00-02-03-5E-32-1A.
CHAP-Challenge
(string)
Randomly generated by the product. As defined in RFC 2865. Only present when the
authentication method for the RADIUS profile is set to CHAP. Length = 19 bytes.
CHAP-Password
(string)
The password assigned to the controller on the Public access > Attributes page. Encoded
as defined in RFC 2865. Only present when the authentication method for the RADIUS
profile is set to CHAP.
Connect-Info
(string)
The string "HTTPS".
EAP-Message
As defined in RFC 2869. Only present when the authentication method for the RADIUS
profile is set to EAP-MD5.
Framed-IP-Address
(32-bit unsigned integer)
IP Address of the controller LAN port.
Controller attributes overview 439