MSM7xx Controllers Configuration Guide v6.4.0

• Vendor-specific (Microsoft)• NAS-Ip-Address • NAS-Ip-Address
◦ MS-MPPE-Recv-Key
• •NAS-Port NAS-Port
•• NAS-Port-TypeNAS-Port-Type
◦ MS-MPPE-Send-Key
• •Message-Authenticator User-Name
• Vendor-specific (Colubris)
• •Service-Type Vendor-specific (WISPr)
◦ Colubris AV-Pair
◦ Location-Name
• State
• User-Name
◦ Colubris-Intercept
◦ Location-ID
• User-Password
Access Reject
◦ Logoff-url
• Vendor-specific (Microsoft)
◦ MSCHAP-Challenge
• VSC
• Acct-Session-Time
• Band
◦ MSCHAP-Error
◦ MSCHAP-Response
• Acct-Input-Gigawords
• Acct-Input-Octets
◦ MSCHAPv2-Response
• Acct-Input-Packets
• Wireless Mode
• •Vendor-specific (WISPr) Acct-Output-Gigawords
Access Challenge
◦ Location-Name
• Acct-Output-Octets
• EAP-Message
• Acct-Output-Packets
• State
◦ Location-ID
Accounting Response
• Acct-Terminate-Cause
◦ Logoff-url
No attributes are supported.
Access request
Acct-Session-Id
(32-bit unsigned integer) Random value generated per authentication by the controller.
Called-Station-Id
(string)
By default, this is set to the MAC address of the controller wireless/LAN port in IEEE format.
For example: 00-02-03-5E-32-1A. To use the MAC address of the Internet port, you must edit
the config file and change the setting of radius-called-station-id-port to WAN in the
<ACCESS-CONTROLLER> section. If location-aware authentication is enabled for the VSC the
user is logged into, then this value is defined by the VSC.
Calling-Station-Id
(string)
The MAC address of the users station in IEEE format. For example: 00-02-03-5E-32-1A.
CHAP-Challenge
(string)
Randomly generated. As defined in RFC 2865. Only present when the authentication method
for the RADIUS profile is set to CHAP. Length = 19 bytes.
CHAP-Password
(string)
The users password. Encoded as defined in RFC 2865. Only present when the authentication
method for the RADIUS profile is set to CHAP.
Chargeable User Identity (CUI)
(string)
As defined in RFC-4372. The CUI is used to associate a unique identifier with a user so that
the user can be identified (for billing, authentication or other purposes) when roaming outside
of their home network.
User attribute definitions 449