MSM7xx Controllers Configuration Guide v6.4.0

The IP address of the port the controller is using to communicate with the RADIUS server.
NAS-Port
(32-bit unsigned integer)
A virtual port number starting at 1. Assigned by the controller.
NAS-Port-Type
(32-bit unsigned integer)
Always set to 19, which represents WIRELESS_802_11.
User-Name
(string)
The username assigned to the user or to a device when using MAC authentication.
Vendor-specific (WISPr)
HP ProCurve supports the following Wi-Fi Alliance vendor-specific attributes.
Location-Name
The WISPr location name assigned to the controller.
• SMI network management private enterprise code = 14122
• Vendor-specific attribute type number = 2
• Attribute type: A string in the format: wispr-location-name=location_name
Location-ID
The WISPr location identifier assigned to the controller.
• SMI network management private enterprise code = 14122
• Vendor-specific attribute type number = 1
• Attribute type: A string in the format: wispr-location-id=location_id
Logoff-url
The WISPr log-off URL that will be used.
• SMI network management private enterprise code = 14122
• Vendor-specific attribute type number = 3
• Attribute type: A string in the format: wispr-logoff-url=URL
Accounting stop. and interim-update
Acct-Session-Time
(32-bit unsigned integer)
Number of seconds this session since this session was authenticated. Only present when
Acct-Status-Type is Interim-Update or Stop.
Acct-Input-Gigawords
(32-bit unsigned integer)
High 32-bit value of the number of octets/bytes received by the user. Only present when
Acct-Status-Type is Interim-Update or Stop.
Acct-Input-Octets
(32-bit unsigned integer)
Low 32-bit value of the number of octets/bytes received by the user. Only present when
Acct-Status-Type is Interim-Update or Stop.
Acct-Input-Packets
(32-bit unsigned integer)
Low 32-bit value of the number of packets/bytes received by the user. Only present when
Acct-Status-Type is Interim-Update or Stop.
User attribute definitions 455