MSM7xx Controllers Configuration Guide v6.4.0

Syntax
max-output-rate=rate
max-input-rate=rate
Where:
DescriptionParameter
Maximum transmit or receive speed in Kbps.rate
One-to-one NAT
NOTE: This feature only applies to client traffic using IPSec or PPTP on the Internet port.
Add this keyword if the user requires a unique IP address when NAT is enabled on the controller.
For more information, see “VPN one-to-one NAT” (page 515) and “Default user one-to-one NAT”
(page 474).
Syntax
one-to-one-nat=value
Where:
DescriptionParameter
Set this to 1 to activate one-to-one NAT support.value
Public IP address
Add this keyword if the user requires a public IP address that is visible on the external network
connected to the controller Internet port. For more information using public IP addresses, see “Default
user public IP address” (page 475) and “Assigning public IP addresses” (page 47).
Syntax
use-public-ip-subnet=value
Where:
DescriptionParameter
Set this to 1 to activate assignment of a public IP
address. Set to 0 to disable.
value
Quotas
These keywords let you define upload and download limits for each user. Limits can be defined
in terms of packets or octets (bytes).
Syntax
max-input-packets=value
max-output-packets=value
max-input-octets=value
max-output-octets=value
max-total-octets=value
max-total-packets=value
486 Working with RADIUS attributes