MSM7xx Controllers Configuration Guide v6.4.0

Where:
DescriptionParameter
Specify the URL of a Web page on an external Web
server.
URL_of_page
Placeholder as defined in the following table.placeholder
Placeholders
By appending the following optional placeholders, you can pass important information to the Web
server about the user. Server-side code can process this information to generate custom pages
on-the-fly.
DescriptionPlaceholder
Returns the URL on the controller where user login information should be posted for
authentication. This option is used with the remote login page feature. By default, this value
%l
is URL encoded. (To enable/disable URL encoding, set the value of url-encode in the
<ACCESS-CONTROLLER> section in the configuration file.)
Returns the NAS ID assigned to the controller. By default, this is the unit serial number. Not
supported in local mode.
%n
Returns the RADIUS login name assigned to the controller. By default, this is the unit serial
number.
%s
Returns the login name of the user.%u
Returns the original URL requested by the user. By default, this value is URL encoded. (To
enable/disable URL encoding, set the value of url-encode in the <ACCESS-CONTROLLER>
section in the configuration file.)
%o
Returns the domain name assigned to the controller Internet port.%i
Returns the IP port number on the controller where user login information should be posted
for authentication.
%p
Returns the IP address of the controller Internet port.%a
When the location-aware feature is enabled, returns the ESSID of the wireless AP with which
the user is associated.
%E
When the location-aware feature is enabled, returns the wireless mode the user is using to
communicate with the AP.
%P
When the location-aware feature is enabled, returns the group name of the wireless AP with
which the user is associated.
%G
When the location-aware feature is enabled, returns the Called-station-id content for the
wireless AP with which the user is associated.
%C
Returns the string sent by the RADIUS server when an authentication request fails. The RADIUS
server must be configured to support this feature. The information contained in the returned
string depends on the configuration of the RADIUS server.
%r
Returns the MAC address of the client station that is being authenticated.%m
Returns the VLAN assigned to the client station at the controller ingress.%v
Colubris AV-Pair - Administrator attribute values
Administrator values let you define settings for administrator accounts.
Each Colubris AV-Pair value is specified using the following format: <keyword>=<value>
The following administrator value keyword is supported:
Colubris AV-Pair - Administrator attribute values 489