Manualshelf

MSM7xx Controllers Configuration Guide v6.4.0

ManualsBrandsHP ManualsNetwork HardwareHP 425 Wireless Dual Radio 802.11n (WW) Access Point
501502503504505506507508509510
Controller
Router
Internet
port
24.1.1.4
Internet
LAN
port
7.1.1.1
VPN Server/
Gateway
(Peer)
3.1.1.2 10.0.0.0
10.0.0.2
Secure
resource
7.1.1.2
AP
Router
5.1.1.0
5.1.1.2
AP
5.1.1.3
Wireless
POS
7.1.1.3
Wireless
POS
To use VPNs to secure wireless client sessions, configure an IPSec policy for this purpose, or
configure the L2TP server or PPTP server.
NOTE: Wireless clients are typically assigned IP addresses from the VPN address pool. Configure
this first via Controller >> Network > Address allocation > VPN address pool. See “VPN address
pool” (page 510).
NOTE: Wireless clients require VPN software that is configured to work with your VPN
configuration on the controller. If wireless clients are connected to an access-controlled VSC,
enabling VPN-based authentication is recommended. See “Configuring VPN-based authentication
on a VSC” (page 350).
508 Working with VPNs