MSM7xx Controllers Configuration Guide v6.4.0

Local tunnel IP address
Specify the IP address of the controller inside the tunnel.
Remote tunnel IP address
Specify the IP address of the remote device inside the tunnel.
Tunnel IP mask
Specify the mask associated with the IP addresses inside the tunnel.
GRE peer IP address
Specify the IP address of the remote device that terminates the tunnel.
Bandwidth control
The controller incorporates a bandwidth management feature that enables control of all user traffic
flowing through the controller.
To configure bandwidth control, select Controller >> Network > Bandwidth control.
Bandwidth control has two separate components: Data rate limits and bandwidth levels. They
interact with the data stream as follows:
Bandwidth control 51