MSM7xx Controllers Configuration Guide v6.4.0

and PoE management. This class includes such devices as IP call controllers and
communication-related servers.
• Class 2 (Media Endpoint Devices): These devices offer all Class 1 features plus media streaming
capability, and include such devices as voice/media gateways, conference bridges, and
media servers.
• Class 3 (Communication Devices): These devices are typically IP phones or end-user devices
that otherwise support IP media and offer all Class 1 and Class 2 features, plus location
identification and emergency 911 capability, Layer 2 switch support, and device information
management.
Local mesh
LLDP is not supported over local mesh links when running in controlled mode.
In autonomous mode, each AP only sees the APs with which it has a local mesh link as neighbors.
SNMP support
Support is provided for the following Physical Topology MIB (RFC 2922).
NOTE: When operating in controlled mode the LLDP agents on controlled APs cannot be queried
via SNMP. Instead, all LLDP information from the APs is stored in the controllers MIBs.
Configuring LLDP on the controller
Controller settings are defined by selecting Controller >> Network > Discovery protocols.
To configure these protocols, select Controller >> Network > Discovery protocols.
On the MSM720
On all other controllers
518 LLDP