MSM7xx Controllers Configuration Guide v6.4.0

LLDP agents
Select this option to globally activate LLDP support on the controller.
LAN port / Internet port / Port 1-6
For each port, select whether the agent will transmit and/or receive LLDP information. Select
Configure TLVs to customize TLV support for each interface.
Transmit
Enable this option to have the agent transmit LLDP information to its neighbors.
Receive
Enable this option to have the agent accept LLDP information from its neighbors.
LLDP settings
Use these options to define global LLDP settings on the controller.
Transmit interval
Sets the interval (in seconds) at which local LLDP information is updated and TLVs are sent to
neighboring network devices.
Multiplier
The value of Multiplier is multiplied by the Transmit interval to define the length of Time to live.
Time to live
Indicates the length of time that neighbors will consider LLDP information sent by this agent to
be valid. Time to live is automatically calculated by multiplying Transmit interval by Multiplier.
Port description TLV content
Select the content to be included in and advertised as part of the port description TLV.
Interface friendly name
Use the friendly name for the interface (the name you see in the management tool).
Interface internal name
Use the internal name for the interface. For example: eth0, eth1.
Configuring LLDP on the controller 519