MSM7xx Controllers Configuration Guide v6.4.0

Collector
Select the collector to which data will be sent.
Sampling rate
Specify the approximate number of packets between samples. For example, if set to 5,
approximately every fifth packet will be sampled (There is some jitter introduced purposefully
into the sample collection). A value of 0 disables sampling.
Max header size
Specify the maximum number of bytes to copy and forward from the header of the sampled
packet.
Counter polling
Counter sampling measurement are obtained by counting the number of packets and octets
passing through the target interface between the defined polling interval.
Collector
Select the collector to which data will be sent.
Polling interval
Specify the amount of time (in seconds) between sending successive octet and packet
counter values for this instance.
532 sFlow