MSM7xx Controllers Configuration Guide v6.4.0

1. On the DHCP administration page, select Action > Set Predefined Options. From the Option
class drop-down menu, select Colubris, and then select Add. The Option Type page opens.
2. On the Option Type page,
• Under Name, specify MSC (for MSM controllers).
• Under Data type, select IP Address and enable the Array checkbox.
• Under Code, specify 1.
• Under Description, specify List of MSC IP addresses (for MSM controller IP addresses).
3. Select OK to close the Option Type page, and then select OK again to return to the DHCP
administration page.
Applying the vendor class
After you define the Colubris vendor class and its options, you can apply the class to specific
Scopes or to the entire DHCP server. You must define the Colubris vendor class for every Scope
from which an AP can get an address.
Use the following steps to add the Colubris vendor-specific option to one Scope on the DHCP server.
1. On the DHCP administration page, in the navigation pane, open the folder that corresponds
to the desired Scope.
2. Right-click Scope Options, and from the resulting menu select Configure Options. The Scope
Options page opens. Select the Advanced tab.
560 DHCP servers and Colubris vendor classes