MSM7xx Controllers Configuration Guide v6.4.0

• Creating multiple trunks for traffic aggregation and routing: This example shows two trunks
being used to aggregate traffic from APs, while a third trunk is used to egress traffic onto the
private network.
Deployment considerations
• All port trunk links must be point-to-point connections between the MSM720 and the other
device configured for port trunking (switch, router, server, etc.) No intervening, non-trunking
devices are allowed.
• To avoid broadcast storms or loops in your network while configuring a trunk, first disable or
disconnect all ports you want to add to the trunk. After you finish configuring the trunk, enable
or re-connect the ports.
Deployment considerations 71