MSM7xx Controllers Configuration Guide v6.4.0

5. Select Controller >> Network > Ports.
6. Select Port 3.
7. Under Trunk settings, set Type to LACP.
8. Select Save.
9. Repeat steps 7 and 8 for ports 4 and 6.
10. Select Controller >> Network > VLANs. Currently, the Access network profile is set as the
default VLAN, so ports 3, 4, 6 appear in the untagged column for this profile. Since LACP
trunks always use the default VLAN, you must move it to the LACP Trunk profile.
Creating a dynamic trunk 77