MSM7xx Controllers Configuration Guide v6.4.0

11. Select LACP Trunk.
12. Under Selected network profiles, select Default. This assigns the LACP Trunk as the default
VLAN (VLAN 22).
13. Select Save. The trunk is now configured and is ready for use.
14. Connect ports 3, 4, and 6 to the switch.
15. Select Controller >> Network > Ports. The status lights for ports 3, 4, and 6 should be green
and all ports should be assigned to Trunk type LACP and Trunk group Dynamic 1.
16. Select Controller >> Network > VLANs. The LACP trunk profile will now show as mapped to
the Dyn1 (dynamic LACP trunk #1) as untagged.
78 Port trunking