MSM7xx Controllers Configuration Guide v6.4.0

Radio 1 on: HP 425, MSM430, MSM460 (not supported in Monitor mode)
5 GHzFrequency band
Up to 54 Mbps.Data rates
This is a legacy mode that can be used to support older wireless client stations.
802.11n/b/g (2.4 GHz)
MSM410, MSM422, HP 517Supported on
Radio 2 on: HP 425, MSM430, MSM460, MSM466
2.4 GHzFrequency band
For 802.11n clients: Up to 130 Mbps on the MSM410, MSM422, HP
425, MSM430, MSM460, MSM466, MSM466-R. (Up to 300 Mbps
Data rates
when using a 40 MHz channel width, which is not recommended in the
2.4 GHz frequency band.) Up to 216.7 Mbps on the HP 517.
For 802.11g clients: Up to 54 Mbps..
For 802.11b clients: Up to 11 Mbps.
When operating in this mode, the AP allows both 802.11n and legacy 802.11b/g
clients to associate. The AP advertises protection in the beacon when legacy clients
are associated or operating on the same channel. This alerts associated 802.11n
clients to use protection when transmitting. The AP also uses protection when
necessary when sending 802.11n data. The type of protection is configurable by
setting the Tx protection parameter (except on the MP 517 where Tx protection is
not configurable, but is automatically supported using a combination of RTS/CTS
and CTS-to-self).
802.11b/g (2.4 GHz)
MSM310, MSM317, MSM320, MSM335, MSM410, MSM422, HP 517
(not supported in Monitor mode on the HP 517)
Supported on
Radio 2 on: HP 425, MSM430, MSM460, MSM466 (not supported in
Monitor mode on the HP 425)
2.4 GHzFrequency band
For 802.11g clients: Up to 54 Mbps.Data rates
For 802.11b clients: Up to 11 Mbps.
This is a legacy mode that can be used to support older wireless client stations.
802.11g (2.4 GHz)
MSM310, MSM320, MSM335Supported on
2.4 GHzFrequency band
Up to 54 Mbps.Data rates
This is a legacy mode that can be used to support older wireless client stations.
90 Wireless configuration