MSM7xx Controllers Release Notes v6.2.0.1

Specify how the dynamically generated name will be created. You can use regular text in
combination with placeholders to create the name. Placeholders are automatically expanded each
time the name is regenerated.
If the placeholders cause the generated name to exceed 32 characters, the name is shortened to
less than 32 characters.
IMPORTANT: Once a system name is dynamically changed by this feature, there is no way to
automatically return to the original system name.
Placeholders
• %RN: System name of the neighboring device to which the port is connected, obtained via the
System Name TLV. Since this is an optional TLV, if it is not available, the Chassis ID TLV is
used instead.
• %RP: Port description of the port on the neighboring device to which the local port is connected,
obtained via the Port Description TLV. Since this is an optional TLV, if it is not available, the
Port ID TLV is used instead.
• %SN: The AP serial number.
• %IP: The AP IP address. An IP address can require up to 15 characters (nnn.nnn.nnn.nnn).
Validation added to the firmware updates page
Firmware signature validation has been added to the Controller >> Maintenance > Firmware updates
page enabling administrators to check firmware integrity before installation.
Old page
8 Changes to the management tool interface