BROCADE 10 Gbps Fibre Channel over Ethernet PCIe Converged Network Adapter and 8 Gbps & 4 Gbps Fibre Channel PCIe Host Bus Adapter Release Notes - Software Release 2.3.0.3 (March 2011)
Brocade Adapter v2.3.0.3 Release Notes Page 3 of 19
Copyright © 2011 Brocade Communications Systems, Inc. All Rights Reserved.
Brocade, the B-wing symbol, BigIron, DCX, Fabric OS, FastIron, IronPoint, IronShield,
IronView, IronWare, JetCore, NetIron, SecureIron, ServerIron, StorageX, and TurboIron
are registered trademarks, and DCFM, Extraordinary Networks, and SAN Health are
trademarks of Brocade Communications Systems, Inc., in the United States and/or in
other countries. All other brands, products, or service names are or may be trademarks
or service marks of, and are used to identify, products or services of their respective
owners.
Notice: This document is for informational purposes only and does not set forth any
warranty, expressed or implied, concerning any equipment, equipment feature, or
service offered or to be offered by Brocade. Brocade reserves the right to make
changes to this document at any time, without notice, and assumes no responsibility for
its use. This informational document describes features that may not be currently
available. Contact a Brocade sales office for information on feature and product
availability. Export of technical data contained in this document may require an export
license from the United States government.
The authors and Brocade Communications Systems, Inc. shall have no liability or
responsibility to any person or entity with respect to any loss, cost, liability, or damages
arising from the information contained in this book or the computer programs that
accompany it.
The product described by this document may contain “open source” software covered
by the GNU General Public License or other open source license agreements. To find
out which open source software is included in Brocade products, view the licensing
terms applicable to the open source software, and obtain a copy of the programming
source code, please visit
http://www.brocade.com/support/oscd