HP StorageWorks Enterprise Virtual Array Updating Product Software Guide (XCS 09534000) (5697-0754, October 2010)

4. Click Switch Settings and enter the following information:
a. Enter the IP Address of the primary switch for the SAN for which you want a report.
Information will be collected for all devices connected to this switch.
b. Clear Discover cascaded switches. This option automatically detects all switches connected
to the switch identified by the IP address. Including all the cascaded switches increases the
data collected for the report to include all the devices connected to all the switches. If you
want to include all the switches, leave this option selected; to include discovery of subnet
switches, also select Subnet.
c. Enter the switch login and password if required.
d. If you have created more than one switch group, use the Select Switch Group dropdown list
to select the fabric to which you want to add this switch.
e. Click Discover Switch to discover the switch and activate the login and password. You should
see the extended switch information with IP addresses in the right-most panel.
f. Click Add to add the switch to the respective Switch Groups.
Preparing for the upgrade20