AB378A Fibre Channel Mass Storage Adapter Installation Guide, December 2006

Fibre Channel Adapter Installation for OpenVMS

Installing Adapter Hardware

Chapter 2

• Ensure that the system is grounded.

• Open the system to gain access to the PCI backplane.

• Insert the card into the highest-performance PCI-X slot available.

Step 2. Install the card

• Slide the adapter edge-connector into the PCI-X slot until it is fully seated.

• Secure the card and reassemble the system.

Figure 2-1 AB378A Single Port Fibre Channel Adapter and Port WWN

The N_Port Port World Wide Name (WWN) is printed on the bulkhead.