AB379A Fibre Channel Mass Storage Adapter Installation Guide, February 2007

Fibre Channel Adapter Installation for HP-UX
Obtaining Card Information after Installation
Chapter 1
13
Obtaining Card Information after Installation
Example of Card information after Installation
#fcmsutil /dev/fcd1
Vendor ID is = 0x001077
Device ID is = 0x002422
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x0012d7
PCI Mode = PCI-X 133 MHz
ISP Code version = 4.0.151
ISP Chip version = 2
Topology = PTTOPT_FABRIC
Link Speed = 4Gb
Local N_Port_id is = 0x610c13
Previous N_Port_id is = None
N_Port Node World Wide Name = 0x50060b00003b2257
N_Port Port World Wide Name = 0x50060b00003b2256
Switch Port World Wide Name = 0x200c080088605a6e
Switch Node World Wide Name = 0x1000080088605a6e
Driver state = ONLINE
Hardware Path is = 0/0/2/1/1
Maximum Frame Size = 2048
Driver-Firmware Dump Available = NO
Driver-Firmware Dump Timestamp = N/A
Driver Version = @(#) libfcd.a HP Fibre Channel ISP 23xx &
24xx Driver B.11.23.04 /ux/core/isu/FCD/kern/src/common/wsio/fcd_init.c:Oct 18
2005,08:19:50
This card is capable of running at higher bus speeds, up to 266Mhz. The speed of the server slot determines
the maximum speed. The actual speed is displayed as the PCI Mode.
Example of Vital Product Data (VPD) after installation
#fcmsutil /dev/fcd1 vpd
V I T A L P R O D U C T D A T A
--------- ------------- -------
Product Description : HP PCI-X 2.0 Dual Port 4Gb Fibre Channel HBA
Part number : AB379-60001