Pass-Thru Installation Instructions for HP c-Class BladeSystem

Open the handle. Insert the Pass-Thru into the bay (1). Close the handle
(2).
Regulatory compliance
identification numbers
For the purpose of regulatory compliance certifications and
identification, this product has been assigned a unique regulatory
model number. The regulatory model number can be found on the
product nameplate label, along with all required approval markings
and information. When requesting compliance information for this
product, always refer to this regulatory model number. The regulatory
model number is not the marketing name or model number of the
product.
Federal Communications Commission notice
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct
the interference at personal expense.
Modifications
The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly approved by
Hewlett-Packard Company may void the user’s authority to operate the
equipment.
Canadian notice (Avis Canadien)
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
European Union regulatory notice
Products bearing the CE marking comply with the following EU
Directives:
• Low Voltage Directive 2006/95/EC
• EMC Directive 2004/108/EC
• Ecodesign Directive 2009/125/EC, where applicable
CE compliance of this product is valid if powered with the correct
CE-marked AC adapter provided by HP.
Compliance with these directives implies conformity to applicable
harmonized European standards (European Norms) that are listed in
the EU Declaration of Conformity issued by HP for this product or
product family and available (in English only) either within the product
documentation or at the following HP website
(http://www.hp.eu/certificates) (type the product number in the
search field).
The compliance is indicated by one of the following conformity
markings placed on the product:
For non-telecommunications products and for EU harmonized
telecommunications products, such as Bluetooth® within power class
below 10mW.
For EU non-harmonized telecommunications products (If applicable, a
4-digit notified body number is inserted between CE and !).
Please refer to the regulatory label provided on the product.
The point of contact for regulatory matters is Hewlett-Packard GmbH,
Dept./MS: HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen,
GERMANY.
Disposal of waste equipment by users in
private households in the European Union
This symbol on the product or on its packaging
indicates that this product must not be disposed of
with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment by
handing it over to a designated collection point for
the recycling of waste electrical and electronic
equipment. The separate collection and recycling of
your waste equipment at the time of disposal will help
to conserve natural resources and ensure that it is
re
cycled in a manner that protects human health and
the environment. For more information about where
you can drop off your waste equipment for recycling,
please contact your local city office, your household
waste disposal service or the shop where you
purchased the product.
Chinese notice
Class A equipment
BSMI notice
Japanese class A notice
Korean class A notice
Vietnam compliance marking notice
This marking is for applicable products only.
Laser compliance
This product may be provided with an optical storage device (that is,
CD or DVD drive) and/or fiber optic transceiver. Each of these devices
contains a laser that is classified as a Class 1 Laser Product in
accordance with US FDA regulations and the IEC 60825-1. The
product does not emit hazardous laser radiation.
Each laser product complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser Notice No. 50, dated June 24,
2007; and with IEC 60825-1:2007.
WARNING: Use of controls or adjustments or
performance of procedures other than those specified
herein or in the laser product's installation guide may result
in hazardous radiation exposure. To reduce the risk of
exposure to hazardous radiation:
• Do not try to open the module enclosure. There are no
user-serviceable components inside.
• Do not operate controls, make adjustments, or perform
procedures to the laser device other than those
specified herein.
• Allow only HP Authorized Service technicians to repair
the unit.
The Center for Devices and Radiological Health (CDRH) of the U.S.
Food and Drug Administration implemented regulations for laser
products on August 2, 1976. These regulations apply to laser products
manufactured from August 1, 1976. Compliance is mandatory for
products marketed in the United States.