HP BLc QLogic 4X QDR InfiniBand Managed Switch and InfiniBand Switch Management Module Installation Guide for HP c-Class BladeSystems
Table Of Contents
- Contents
- Preparing for Installation
- Hardware Installation
- Installing an HP BLc QLogic 4X QDR InfiniBand Managed Switch
- Installing InfiniBand Cables in an HP BLc QLogic 4X QDR InfiniBand Managed Switch
- Removing an InfiniBand Cable from the HP BLc QLogic 4X QDR InfiniBand Managed Switch
- InfiniBand Subnet Management
- Hardware Removal
- Regulatory Compliance
- Installation of Switch Management Module
HP BLc QLogic 4X QDR InfiniBand Managed Switch and InfiniBand Switch Management Module Installation Guide 13
The QLogic Fabric Manager is required for managing and troubleshooting an HP BLc QLogic 4X QDR
InfiniBand Managed Switch. A subnet manager can be host-based (installed and run on a host node
connected to the InfiniBand fabric). You can also use a switch-based subnet manager when certain
managed switches are incorporated into the InfiniBand fabric.
For more information about InfiniBand subnet management, see the InfiniBand interconnect documentation
that came with your system or cluster. Also see the HP InfiniBand Options for HP ProLiant and Integrity
Servers Quickspec on the HP website:
http://h18000.www1.hp.com/products/quickspecs/13078_div/13078_div.HTML