HP 501 Wireless Client Bridge V1.0.0.0 Configuration and Administration Guide

34 Wireless configuration

Viewing the MAC translation table

You can select Status > MAC translation to view the MAC address/IP address associations

for clients on the Ethernet network. The following fields display:

Click Clear MAC table to delete all entries from the list.

ACK failure count Count of ACK frames not received when expected.

FCS error count Count of FCS errors detected in a received MPDU frame.

Transmitted frame

count

Count of each successfully transmitted MSDU.

WEP undecryptable

count

Count of encrypted frames received and the key configuration

of the transmitter indicates that the frame should not have been

encrypted or that frame was discarded due to the receiving

station not implementing the privacy option.

Cloned MAC address If MAC address cloning is enabled for a device on the Ethernet

port, the MAC address displays here.

Field Description

MAC address The MAC address of the client on the wired network.

IP address The IP address of the client on the wired network.

Tx/Rx packets Total packets transmitted from the HP 501 to the client or

received by the HP 501 from the client.