HP 501 Wireless Client Bridge V1.0.0.0 Configuration and Administration Guide

Email alert 53
• Alert indicates action must be taken immediately.
• Critical indicates critical conditions.
• Error indicates error conditions.
• Warning indicates warning conditions.
• Notice indicates normal but significant conditions.
• Informational indicates informational messages.
• Debug indicates debug-level messages.
Non-urgent severity
This setting determines the severity level for log messages that are considered to be non-urgent.
Messages in this category are collected and sent in a digest form at the time interval specified
by the non-urgent log duration. The security level you select and all levels up to but not
including the lowest urgent level are considered non-urgent. Messages below the security level
you specify are not sent via email.
See Urgent message severity on page 52 for information about the security levels.
Non urgent log duration
This setting determines how frequently the non-urgent messages are sent to the email (SMTP)
server. The range is 30 to 1440 minutes. The default is 30 minutes.
Non-urgent messages are sent when the time duration is reached or the number of messages
exceeds the configured Depth value on the System log page, whichever is first.
Mail server configuration
Mail server address
Specify the IP address or hostname of the SMTP server on the network.
Mail server security
Specify whether to use SMTP over SSL (TLSv1) or no security (Open) for authentication with
the mail server. The default is Open.
Mail server port
Configure the TCP port number for SMTP. The range is a valid port number from 0 to 65535.
The default is 25, which is the standard port for SMTP.
Username
This field displays only when TLSv1 is selected as the Mail server security setting. Specify
the username to use for authentication with the mail server. The username can be from 1 to 64
characters long and can include any printable characters.