HP 517 802.11ac Unified Walljack Configuration Guide v6.4.0

QoS queueL2 priority
Very high - 7
nl
DiffServ
This value only applies if VLAN tagging is set to Tagged.
Specify a value for the Differentiated Services codepoint (DSCP) field in IPv4 and IPv6 packet
headers (as defined in RFC2474). The codepoint is composed of the six most-significant bits
of the DS field.
QoS queueDiffServ codepoint (DSCP) value
1> 33
226 - 33
318 - 25
41 - 17
Disabled0
VLAN
This option lets you define a primary and secondary VLAN on the port.
In their default configuration, Ports 1 to 4 and the Uplink port belong to the default VLAN (VLAN
1). This places all ports on the switch onto one physical broadcast domain. Ports 1 to 4 can be
removed from the default VLAN and assigned to their own VLAN. The Uplink port however, is
always a member of all defined VLANs. If a VLAN is defined on any port, it is also automatically
defined on the Uplink port. In this way, the Uplink port is always connected to Ports 1 to 4.
VLAN options
Primary VLAN
(Not available when Send Network Policy TLV is enabled.)
Possible settings and their effects are as follows:
Uplink portOutgoing traffic on the portIncoming traffic on the portOption
Untagged.Untagged.Untagged.Untagged
Tagged with the PrimaryVLAN
ID.
Tagged with the PrimaryVLAN
ID.
Tagged with the PrimaryVLAN
ID.
Tagged
Tagged with the PrimaryVLAN
ID.
Untagged.Untagged.Uplink
tagging
Port configuration page 23