HP 517 802.11ac Unified Walljack Configuration Guide v6.4.0

In this scenario, Port 2 is bound to a non-access-controlled VSC named Guest. This VSC is configured
to provide 802.1X authentication with the login credentials for user A validated against the local
user list stored on the controller.
A local account is created for user A with an egress VLAN ID of 30. Once user A is authenticated,
the user's traffic is sent on VLAN 30.
Example 3. When binding to an access-controlled VSC
If deploying this example using an MSM720, the switch is connected to port 1, 2, 3, or 4 on the
MSM720, and the MSM720 is connected to the private network using port 5 or 6. Also, any use
of VLAN 10 should be replaced with VLAN 11.
On all other controllers, the switch is connected to the LAN port on the controller, and the controller
is connected to the private network using the Internet port.
28 Configuring the switch ports