HP 517 802.11ac Unified Walljack Configuration Guide v6.4.0

Key configuration settings for the VSC are as follows:
Example 3. Binding to multiple VSCs
If deploying this scenario using an MSM720, the switch is connected to port 1, 2, 3, or 4 on the
MSM720, and the MSM720 is connected to the private network using port 5 or 6. Also, any use
of VLAN 10 should be replaced with VLAN 11.
On all other controllers, the switch is connected to the LAN port on the controller, and the controller
is connected to the private network via the Internet port.
In this scenario, the HP 517 provides access for three types of users as follows:
34 Configuring the switch ports