HP 517 802.11ac Unified Walljack Configuration Guide v6.4.0

option. Authentication occurs via the local user accounts on the controller (via 802.1X or
MAC-based). Once authenticated, user A gains direct access to any resources on the private
network.
Key configuration settings for Port 2 are as follows:
Key configuration settings for the VSC are as follows:
If the private network is operating on a VLAN, you can assign a VLAN to Port 2. In the following
scenario, once authenticated, the user gains direct access to any resources on the private network
using VLAN 10.
Port configuration page 39