HP 517 802.11ac Unified Walljack Configuration Guide v6.4.0

Access Points per Bandwidth Utilization - Current
Displays the number of APs currently operating in each bandwidth utilization range: <50%,
50% -80%, >80%.
Only online access points with radios that are enabled and operating in access point and/or
local mesh mode are shown on this chart.
The percent utilization is calculated by comparing the total throughput (transmitted/received)
of all radios on an AP for the last minute against the maximum throughput that the radios could
theoretically achieve.
Access Points with Highest Utilization - Last 24 Hours
Displays the ten access points with the highest utilization (in bytes) over the last 24 hours. If
an AP has more than one radio, a separate bar is shown for each radio.
Select an access point name in the chart to see the AP details page “AP details” (page 44).
Dashboard 43