HP 517 802.11ac Unified Walljack Configuration Guide v6.4.0

• Ekahau is not supported.
• Severe interference detection/mitigation, including spectral analysis, is not supported.
• Load balancing is not supported.
• Airtime fairness is not supported.
• Tx beamforming is not supported.
• Aeroscout tags are not supported.
• Tx protection is not configurable, but is automatically supported using a combination of
RTS/CTS and CTS-to-self.
• Guard interval is not configurable, but is always set to Short. It will automatically downgrade
to Long based on the capability of connected clients or the wireless environment.
• Wireless protection using WPA with TKIP encryption.
• When operating in 802.11n/b/g mode, channel width is automatically set to 20 MHz and
cannot be changed.
• DiffServ cannot be set as the only priority lookup option when configuring QoS on a switch
port. It is only available in combination with 802.1p.
• Egress rate limiting is not supported.
• 1000 Mbps port speed is only supported at half-duplex.
Configuration considerations 5