IPv6 Configuration Guide K/KA/KB.15.15

Example 80 Viewing static port (and trunk) ACL assignments
The following output shows IPv4 and IPv6 ACLs configured on various ports and trunks on the
switch:
HP Switch(config)# show access-list ports all
1
Access Lists for Port 1
Inbound Ipv6: List-01-Inbound
2
Access Lists for Port 12
Inbound : 101
Type : Extended
Inbound Ipv6: Accounting
3
Access Lists for Port Trk2
Inbound Ipv6: Accounting
4
Access Lists for Port Trk5
Inbound : Marketing
Type : Extended
1
An IPv6 ACL is filtering inbound traffic on port 1
2
Both an IPv4 ACL and an IPv6 ACL are filtering inbound IPv4
and IPv6 traffic, respectively, on port 12
3
An IPv6 ACL is filtering inbound IPv6 traffic on Trunk 2 (Trk2)
4
An IPv4 ACL is filtering inbound IPv4 traffic on Trunk 5 (Trk5)
Viewing the content of a specific ACL
Displays a specific IPv6 or IPv4 ACL configured in the running config file in an easy-to-read tabular
format.
Syntax:
show access-list identifier [ config ]
Displays detailed information on the content of a specific ACL configured in the
running-config file.
NOTE: This information also appears in the show running display. If you execute write
memory after configuring an ACL, it also appears in the show config display.
For information on IPv4 ACL operation, see the latest version of the Access Security Guide for your
switch.
138 IPv6 Access Control Lists (ACLs)