IPv6 Configuration Guide K/KA/KB.15.15

Syntax:
show ipv6 ospf3 neighbor [ router-id ] [ detail ]
Displays OSPFv3 information learned for neighbor routers.
router-id
Displays information for a specific neighbor router.
detail
Displays additional, neighbor-specific OSPFv3 information.
Example 158 show ipv6 ospf3 neighbor output
HP Switch(ospf3)# show ipv6 ospf3 neighbor
OSPFv3 Neighbor Information
Interface Router ID Pri State Rxmt QLen Events
--------- --------------- ----- ---------- ---------- ------
Vlan-55 15.1.0.1 1 FULL 0 0
Vlan-75 15.1.1.2 1 FULL 0 0
tunnel-3 4.3.2.1 1 Full 0 0
Example 159 show ipv6 ospf3 neighbor detail output
HP Switch(ospf3)# show ipv6 ospf3 neighbor 15.1.0.1 detail
OSPFv3 Neighbor Information for neighbor 15.1.0.1
IPv6 Address : fe80::55:1
Router ID : 15.1.0.1 State : FULL
Interface : vlan-55 Designated Router : 15.1.0.1
Area : 0.0.0.1 Backup Designated Router : 15.1.0.4
Priority : 1 Retransmit Queue Length : 0
Options : 19 Neighbor Uptime : 1days
Events : 0 Dead Timer Expires : 33 sec
OSPFv3 Neighbor Information for neighbor 15.1.0.1
IPv6 Address : fe80::55:1
Router ID : 15.1.0.1 State : FULL
Interface : tunnel-3 Designated Router : 0.0.0.0
Area : 0.0.0.1 Backup Designated Router : 0.0.0.0
Priority : 1 Retransmit Queue Length : 0
Options : 19 Neighbor Uptime : 1days
Events : 0 Dead Timer Expires : 33 sec
Viewing or clearing OSPFv3 packet statistics counters
Syntax:
show ipv6 ospf3 statistics [ vlan vid | tunnel tunnel-id ]
clear ipv6 ospf3 statistics [ vlan vid | tunnel tunnel-id ]
Displays the statistics on OSPFv3 packets sent and received on the VLAN interfaces
on an OSPFv3-enabled routing switch, including the number of errors that occurred
during packet transmission.
vlan vid
Displays the statistics for the specified VLAN.
clear
Resets the OSPFv3 traffic counters to zero.
236 OSPFv3 Routing