KB.15.15

lsid lsid-#

Subset option to filter displayed LSA database or advertisements to show only

the AS-scope data having the specified (32-bit) IP address as a link-state ID.

Can also be filtered with the router-id option to further define the source of

displayed information.

router-id rtr-id-#

Subset option to filter displayed LSA database or advertisements to show only

the AS-scope data having the specified router-ID.

Can also be filtered with thelsid option to further define the source of displayed

information.

detail

Displays additional details for each LSA included in the range of displayed

LSAs for any of the above options.

advertise

Displays the hexadecimal data in LSA packets (advertisements) within the

OSPFv3 AS- scope on the routing switch.

The output can also be filtered by lsid and router-id.

To display link-state AS-scope link-state information, enter show ipv6 ospf3 link-state

as-scope at any CLI level. When you enter this command, an output similar to the following is

displayed:

Example 163 show ipv6 ospf3 link-state as-scope output

HP Switch# show ipv6 ospf3 link-state as-scope

OSPFv3 AS Scope Link State Database

Advertising

LSA Type Router ID Link State ID Age Sequence # Checksum

----------- ------------ ------------- --- ---------- ----------

As-External 15.1.1.2 0 57 0x80000037 0x0000b76b

As-External 15.1.1.2 2 945 0x80000062 0x0000b3d1

As-External 15.1.1.2 3 987 0x80000062 0x0000dfa0

As-External 15.255.155.1 1 250 0x8000006f 0x0000fae0

To display link-state AS-Scope LSA advertisements in hexadecimal format, use the advertise

keyword. Example 164 (page 239) displays an example of this output for router ID 15.1.1.2 in an

AS.

238 OSPFv3 Routing