KB.15.15

rtr-id

Displays information for a specific virtual-neighbor router detected by the routing

switch.

area area-id

Displays information learned from a virtual neighbor detected in a specific area.

Example 173 Display output for all virtual neighbors detected on the routing switch

HP Switch# show ipv6 ospf3 virtual-neighbor

OSPFv3 Virtual Interface Neighbor Information

Router ID State IPv6 Addr Events

------------- -------- ------------------------- ---------

1.0.0.4 FULL 2620:e::55:2 7

Example 174 Display output for a specific virtual neighbor

HP Switch# show ipv6 ospf3 virtual-neighbor 1.0.0.4

Router ID : 1.0.0.4

State : FULL

IPv6 Addr : 2620:e::55:2

RtQLen : 5

Events : 7

Viewing OSPFv3 SPF statistics

Enter this command to display the log used to record SPF calculations on an OSPFv3-enabled

routing switch. The SPF algorithm recalculates the routes in an OSPFv3 domain when a change in

the area topology is received.

Syntax:

show ipv6 ospf3 spf-log

Displays the event that resulted in the last 100 executions of the SPF algorithm on

the routing switch. Possible events (reasons) are:

Re-Init

OSPFv3 was enabled or disabled on the routing switch.

Router LS Update

A Router-LSA was received.

Network LS Update

A Network-LSA was received.

Generated RTR LSA

A Router-LSA was generated on the routing switch.

Generated NTW LSA

A Network-LSA was generated on the routing switch.

244 OSPFv3 Routing