KB.15.15

Example 8 show IPv6 VLAN vid output

HP Switch# show ipv6 vlan 10

Internet (IPv6) Service

IPv6 Routing : Disabled

Default Gateway : fe80::213:c4ff:fedd:14b0%vlan10

ND DAD : Enabled

DAD Attempts : 3

Vlan Name : VLAN10

IPv6 Status : Enabled

IPv6 Address/Prefixlength Expiry

--------------------------------- ------------------------

2001:db8:a03:e102::1:101/64 Fri May 19 11:51:15 2009

fe80::1:101/64 permanent

Syntax:

show run

In addition to the other elements of the current configuration, this command lists the

statically configured, global unicast IPv6 addressing and the current IPv6

configuration per-VLAN. The listing may include one or more of the following,

depending on what other IPv6 options are configured on the VLAN. Any SLAAC

commands in the configuration are also listed in the output, but the actual addresses

resulting from these commands are not included in the output.

ipv6 enable

ipv6 address fe80::interface-id link-local

ipv6 address prefix:interface-id/prefix-length

ipv6 address autoconfig

ipv6 address dhcp full [ rapid-commit ]

ipv6 global-unicast-address/prefix

Viewing the current IPv6 addressing configuration 25