KB.15.15

Syntax:

[no] ipv6 mld fastleave port-list

Enables the fast leave function on the specified ports in a VLAN.

The no form disables the fast leave function on the specified ports in a VLAN.

Default: Enabled

NOTE: This command must be issued in a VLAN context.

Example 47 Configuring fastleave

To disable fast leave on ports in VLAN 8:

HP Switch(vlan-8)# no ipv6 mld fastleave 14-15

To enable fast leave on ports in VLAN 8:

HP Switch(vlan-8)# ipv6 mld fastleave 14-15

Configuring forced fastleave

Syntax:

[no] ipv6 mld fastleave port-list

Enables the forced fast leave function on the specified ports in a VLAN.

The no form disables the forced fast leave function on the specified ports in a VLAN.

Default: Disabled

NOTE: This command must be issued in a VLAN context.

Example 48 Configuring forced fastleave

To enable forced fast leave on ports in VLAN 8:

HP Switch(vlan-8)# ipv6 mld forcedfastleave 19-20

To disable forced fast leave on ports in VLAN 8:

HP Switch(vlan-8)# no ipv6 mld forcedfastleave 19-20

Viewing the current MLD status

For more information, see “Current MLD status” (page 83).

Syntax:

show ipv6 mld

Displays MLD status information for all VLANs on the switch that have MLD

configured.

show ipv6 mld vlan vid

Displays MLD status for the specified VLAN.

vid

VLAN ID

Configuring forced fastleave 73