KB.15.15

Primary VLAN The Primary VLAN is the VLAN the switch

uses to run and manage these features and

data.

Management VLAN Configuring a secure Management VLAN

creates an isolated network for managing

the HP switches that support this feature.

802.1Q VLAN ID The VLAN identification number, or VID.

Name The default or specified name assigned to

the VLAN. For a static VLAN, the default

name consists of VLAN-x where x matches

the VID assigned to that VLAN. For a

dynamic VLAN, the name consists of

GVRP_x where x matches the applicable

VID.

Status Port-Based, static VLANPort-Based

Protocol Protocol-Based, static

VLAN

Dynamic Port-Based, temporary

VLAN learned through

GVRP

Voice Indicates whether a

port-based VLAN is

configured as a voice

VLAN.

Jumbo Indicates whether a VLAN

is configured for Jumbo

packets.

Example 1 Viewing VLAN listing with GVRP enabled

The listing from the show vlans command when GVRP is disabled (the default) and Dynamic

VLANs do not exist on the switch.

HP Switch#: show vlans

Status and Counters - VLAN Information

Maximum VLANs to support : 256

Primary VLAN : DEFAULT_VLAN

Management VLAN :

VLAN ID Name | Status Voice Jumbo

------- -------------------- + ---------- ----- -----

1 DEFAULT_VLAN | Port-based No No

10 VLAN_10 | Port-based Yes Yes

15 VLAN_15 | Port-based No No

20 VLAN_20 | Protocol No No

33 VLAN_33 | Dynamic No No

Viewing the VLAN membership of one or more ports

Syntax:

show vlan ports port-list [detail]

Viewing the VLAN membership of one or more ports 17