KB.15.15

Table 24 Error messages generated by DSCP policy changes

DescriptionError message

You have tried to configure a codepoint in a global or classifier-based

QoS policy for which there is no associated priority (No-override). Use

DSCP Policy decimal-codepoint not

configured

the qos dscp-map command to configure a priority for the codepoint,

then re-enter the codepoint in the QoS configuration.

You have tried to configure a codepoint in a global or classifier-based

QoS policy that is already in use by other QoS policies. Before

Cannot modify DSCP Policy codepoint - in

use by other qos rules.

remapping the codepoint to a new priority, you must first reconfigure

the other QoS policies so that they do not use the current

codepoint-priority mapping. You can have multiple QoS policies that

use the same codepoint to mark packets as long as it is acceptable for

all such policies to use the same 802.1p priority.

Mapping of outbound port queues

This table shows the mapping of 802.1p priorities to outbound port queues.

Table 25 Mapping 802.1p priorities to outbound port queues

Queues

(default)

802.1p

priority

1111 (lowest)

230 (normal)

2354

476

87 (highest)

Mapping of outbound port queues 259