HP 5400R zl2 Installation and Getting Started Guide

1-6
Introducing the HP 5400R zl2 Switches
Network Connectivity, Speeds and Technologies
Introducing the HP 5400R zl2
Switches
Network Connectivity, Speeds and
Technologies
These products support optional network connectivity as follows:
Table 1-1. Optional Network Connectivity, Speeds and Technologies
Transceiver Form-
Factor and Connector
1
Speed Technolog
y
Cabling
SFP ("mini-GBIC")
Connector
SFP+
Connector
100
Mbps
100-FX Fiber (multimode) LC
100-BX Fiber (single mode) LC
1 Gbps
1000-T Copper (twisted-pair) RJ-45
1000-SX Fiber (multimode) LC
1000-LX Fiber (multimode or single
mode)
LC
1000-LH Fiber (single mode) LC
1000-BX Fiber (single mode) LC
10 Gbps
10-Gig
Direct
Attach
Copper (twinaxial) Not
Applicable
10-Gig SR
Fiber (multimode)
LC
10-Gig
LRM
Fiber (multimode)
LC
10-Gig LR Fiber (single mode) LC
10-Gig ER
Fiber (single mode) LC
1
For supported transceivers, visit www.hp.com/networking/support.
– In the first textbox, type J4858 (for 100-Mb and Gigabit information), or J8436 (for 10-Gigabit
information).
– Select any of the products that display in the dropdown list.
– Select Product support information.
Then click on Manuals and find the Transceiver Support
Matrix.
For technical details of cabling and technologies see "Cabling and Technology Information" in the
appendices.