HP 5400R zl2 Installation and Getting Started Guide

1-16
Introducing the HP 5400R zl2 Switches
Front of the Switch
Introducing the HP 5400R zl2
Switches
MM Shutdown Button
When you want to remove a module, the MM shutdown button halts all the
management functions. It will not reboot when this button is pressed.
If the system is running with two management modules and the MM shutdown
button is pressed on the active module, this causes a failover to the standby
module.
If the system is running with two management modules and the MM shutdown
button is pressed on the standby module, no failover occurs.
MM Reset Button
The MM reset button resets the Management Module to which it is attached.
If the system is running with two management modules, and if the active
module is reset, this causes a failover to the standby module.
If the system is running with two management modules and the on reset is the
active, no failover occurs.
When a user presses the reset button, the module will be reset and will reboot.
If the system is running with two management modules and the MM shutdown
button is pressed on the standby module, no failover occurs.