HP 5400R zl2 Installation and Getting Started Guide

1-18
Introducing the HP 5400R zl2 Switches
Back of the Switch
Introducing the HP 5400R zl2
Switches
Figure 1-6. Back of a 5412R zl2 switch with two power supplies
Power Connector
The Series 5400R zl2 Switches do not have a power switch; they are powered
on when connected to an active AC power source.
The 5400R zl2 switches automatically adjust to any voltage between 100-127
volts or 200-240 volts when using the J9828A power supply, 110-127 volts or
200-240 volts when using the J9829A power supply, and 115-127 volts and 200-
240 volts when using the J9830A power supply, and either 50 or 60 Hz. There
are no voltage range settings required.
Redundant Power Supply
Load-sharing redundant power supplies J9828A, max 630W, system power
(12V), 275W of POE power; J9829A, 630W max system (12V) power, 900W max
POE power; J9830A, 630W max, system (12V) power, 2500W max POE power