HP 5400R zl2 Installation and Getting Started Guide

1. Prepare the Installation Site ................................2-8

Cabling Infrastructure ....................................2-8

Installation Location .....................................2-8

2. Install Switch Modules .....................................2-8

.......................................................2-9

Installing a Management Module Battery ...................2-10

3. (Optional) Install Another Power Supply .....................2-12

4. Verify the Switch Passes Self Test ..........................2-14

LED Behavior: .........................................2-16

5. Mount the Switch ........................................2-17

Rack or Cabinet Mounting ...............................2-17

Horizontal Surface Mounting .............................2-21

6. Install the Grounding Wire .................................2-21

7. Connect the Switch to a Power Source ......................2-22

8. Connect the Network Cables ...............................2-22

10. (Optional) Connect to the Management Console of the Switch . 2-23

Terminal Configuration ..................................2-24

Setting Up a Console Connection .........................2-24

Console Cable Pinouts ..................................2-26

Telnet Console Access ..................................2-27

Out-of-Band Management (OOBM) Port .......................2-27

Hot Swapping Switch Modules ...................................2-28

Adding or Replacing Modules ................................2-28

.............................................................2-28

3 Getting Started With Switch Configuration

Recommended Minimal Configuration ..........................3-1

Using the Switch Setup Screen ................................3-2

Where to Go From Here ......................................3-4

Using the IP Address for Remote Switch Management ................3-5

Starting a Telnet Session .....................................3-5

Starting a Web Browser Session ...............................3-5

4 Replacing Components

Replacing Power Supplies ........................................4-2

Replacing Fan Trays .............................................4-4