HP Power over Ethernet (PoE/PoE+) Planning and Implementation Guide

13-21
Planning and Implementation for the HP 5400zl/8200zl Switches
Planning the PoE Configuration
Power Configuration for HP 5412zl/8212zl PoE/PoE+
Switches
Table 13-10 shows the maximum PoE/PoE+ power available for various
power configurations.
Note Using PoE power supplies J8712A and J8713A with the J9306A in PoE/PoE+
switches is NOT supported. Use the J9306A zl power supply for switches
providing both PoE and PoE+ power.
Table 13-10. HP 5412zl/8212zl Power Configurations for PoE/PoE+
(With External Power
Supplies Added>
5 0 N+1 Up to 1092 W 1365 W
6 0 Full Up to 819 W 1638 W
0 5 N+1 Up to 3600 W 4500 W
0 6 Full Up to 2700 W 5400 W
Switch Model 5412zl/
8212zl
Number of Power Supplies Redundancy Model Non-Redundant
Power Available
J8712A
(110 or 220 volts)
J8713A
(220 volts only)
N + 1
or
Full
Redundant PoE Power Non-Redundant
PoE Power
Switch Model 5406zl/
8206zl
Number of Power Supplies
J9306A
Redundancy Model Non-Redundant
Power Available
@ 110 - 127 V @ 200-240 V N + 1 or
Full
Redundant PoE/PoE+
Power
Non-Redundant
PoE/PoE+ Power
PoE/PoE+ Power
(54v) Internal
2 0 - None 600 W
3 0 N+1 Up to 300 W 900 W
4 0 Full Up to 600 W 1200 W
0 2 - None 1800 W
0 3 N+1 Up to 900 W 2700 W
0 4 Full Up to 1800 W 3600 W
Continued on the next page.