HP Power over Ethernet (PoE/PoE+) Planning and Implementation Guide

13-32
Planning and Implementation for the HP 5400zl/8200zl Switches
Configuration Examples
HP 5412zl/8212zl Switch Configurations
The HP 5412zl Switch and the HP 8212zl Switch share a completely common
PoE/PoE+ implementation. Port counts, power supply wattages,
specifications, and functionality for these two platforms are the same with
respect to PoE.
This section is divided into sub-sections:
■ Standard J8712A Configurations
■ Standard J8713A Configurations
■ Mixed J8712A and J8713A Configurations
■ Using the J9306A Power Supply
■ HP ProCurve 5412zl/8212zl Configurations using the Power Supply Shelf
Standard J8712A Configurations
The table in each example configuration contains entries that show the PoE
power available for the PoE modules. There needs to be two power supplies
in the HP 5412zl/8212zl Switch to power all 12 slots. Only one power supply
in the HP 5412zl/8212zl Switch is an unsupported configuration.
Figure 13-11.Example of an HP 5412zl Switch with two power supplies, J8712A
In this example (Figure 13-11) there are two power supplies supplying 273
watts each for a maximum of 546 watts.
35 ports can receive up to
15.4 watts of PoE power
The PoE power for all ports on
this module have been disabled
273 watts
for PoE
273 watts
for PoE
Back
Front