HP Power over Ethernet (PoE/PoE+) Planning and Implementation Guide

14-1

Planning and Implementation for the

HP 5400R zl2 Switches

Introduction

This chapter discusses the planning process you should follow to successfully

implement PoE or PoE+ on HP 5400R zl2 switches.

See “General Considerations” on page A-1 for an example list of

considerations during the planning phase.

HP 5400R zl2 Switches

Note The PoE/PoE+ capabilities of the 5400R zl2 and chassis products, along with

the power supplies and modules that provide that PoE/PoE+ power to

connected devices, are described in this chapter.

Pre-defined bundles of chassis, power supplies, and modules are available,

but are not specifically described in this chapter. Go to www.hp.com/

networking/support and search on “5400” to see all the products that are

available for these switch series.