HP Power over Ethernet (PoE/PoE+) Planning and Implementation Guide

14-23
Planning and Implementation for the HP 5400R zl2 Switches
Configuration Examples
HP 5412R zl2 Switch Configurations
This section is divided into sub-sections:
■ Standard J9828A Configurations
■ Standard J9829A Configurations
■ Mixed J9828A, J8929A and J9830A Configurations
■ Using the J9830A Power Supply
Standard J9828A Configurations
The table in each example configuration contains entries that show the PoE
power available for the PoE modules. There needs to be two power supplies
in the HP 5412R zl2 Switch to power all 12 slots. Only one power supply in the
HP 5412R zl2 Switch is an unsupported configuration.
In this example (Figure 14-8) there are two power supplies supplying 254 watts
each for a maximum of 508 watts.
Figure 14-8. Example of an HP 5412R zl2 Switch with two power supplies, J9828A
The following table shows the label and descriptions for HP 5412R zl2 with
two power supplies, J9828A:
Label Description
1 The PoE power for all ports on this
module have been disabled