HP Power over Ethernet (PoE/PoE+) Planning and Implementation Guide

4-6

Planning and Implementation for the HP 2530-PoE+ Switches

Planning the PoE Configuration

HP 2530-24 and 24G PoE+ Switch Configurations

The table in the example configuration contain entries that show the PoE/

PoE+ power available when the HP 2530-24-PoE+ or 24G-PoE+ Switch is used

to supply PoE or PoE+ power.

Figure 4-2. Example of an HP 2530-24G-PoE+ Switch (also applies to HP 2530-24-

PoE+ Switch)

Note: PoE or PoE+ is not supplied to any of the SFP ports.

Any 6 of the 24 ports can be used, not just the first six ports

Any 12 of the 24 ports can be used, not just the first twelve ports

HP 2530G-24G PoE+ Switch

Any 12 of the ports can receive

up to 15.4 Watts of PoE+ power

All 24 ports can receive up to

7.5 Watts of PoE power

Any 6 of the ports can receive

up to 30 Watts of PoE+ power

Source of Power Watts

Available

Number of Ports Powered

and Average Watts/Port

Internal PoE+ Power

Supply

195 6 @ average 30 W each

12 @ average 15.4 W each

24 @ average 7.5 W each