HP Power over Ethernet (PoE/PoE+) Planning and Implementation Guide

4-7

Planning and Implementation for the HP 2530-PoE+ Switches

Planning the PoE Configuration

HP 2530-48 and 48G PoE+ Switch Configurations

The table in the example configuration contain entries that show the PoE/

PoE+ power available when the HP 2530-48 or 48G PoE+ Switch is used to

supply PoE or PoE+ power.

Figure 4-3. Example of an HP 2530-48G-PoE+ Switch (also applies to HP 2530-48-

PoE+ Switch)

Note: PoE or PoE+ is not supplied to any of the SFP ports.

Any 12 of the 48 ports can be used, not just the first twelve ports

Any 24 of the 48 ports can be used, not just the first twenty-four ports

Any 12 of the ports can receive

up to 30 Watts of PoE+ power

Any 24 of the ports can receive

up to 15.4 Watts of PoE power

HP 2530-48G PoE+ Switch

All 48 ports can receive up to 7.5

Watts of PoE power

Source of Power Watts

Available

Number of Ports Powered

and Average Watts/Port

Internal PoE Power

Supply

382 12 @ average 30 W each

24 @ average 15.4 W each

48 @ average 7.5 W each