IPv6 Configuration Guide K/KA/KB.15.15

DSCPMatchAF
001110af13
010010af21
010100af22
010110af23
011010af31
011100af32
011110af33
100010af41
100100af42
100110af43
Default
Matches with the 000000 (default) DSCP.
ef
Expedited forwarding (EF; 000000) DSCP match.
precedence
Supports selection of a precedence setting in the DSCP.
NamePrecedence BitsOption
priority001cs1
immediate010cs2
flash011cs3
flash-override100cs4
critical101cs5
internet (for internetwork control)110cs6
network (for network control)111cs7
NOTE: The precedence criteria described in this section are applied in addition
to any other selection criteria configured in the same ACE. Also, where dscp is
configured in a given ACE, the established keyword and the optional TCP
control bits cannot be configured.
[log]
This option can be used after the DA to generate an Event Log message if:
• The action is deny or permit.
• There is a match.
• ACL logging is enabled. See “Enabling ACL logging on the switch” (page 145).
For a given ACE, if log is used, it must be the last keyword entered.
Table 12 DSCP codepoints with decimal equivalents
DecimalDSCP bitsDecimalDSCP bitsDecimalDSCP bits
4310101122 (3
2
)0101100 (default)000000
44101100230101111000001
45101101240110002000010
118 IPv6 Access Control Lists (ACLs)