KB.15.15

Example 94 IPv6 ACL performance monitoring output

HP Switch# show statistics aclv6 V6-02 vlan 20 vlan

HitCounts for ACL V6-02

Total

( 5) 10 permit icmp ::/0 fe80::20:2/128 128

( 4) 20 permit icmp ::/0 fe80::20:3/128 128

( 136) 30 permit tcp fe80::20:1/128 ::/0 eq 23

( 2) 40 deny icmp ::/0 fe80::20:1/128 128

( 10) 50 deny tcp ::/0 ::/0 eq 23

( 8) 60 deny icmp ::/0 ::/0 133

( 155) 70 permit ipv6 ::/0 ::/0

Example 95 (page 151) shows a sample of performance monitoring output for an IPv4 ACL assigned

as a VACL.

Example 95 IPv4 ACL performance monitoring output

HP Switch# show statistics aclv4 102 vlan 20 vlan

HitCounts for ACL 102

Total

( 1) 10 permit icmp 10.10.20.3 0.0.0.0 10.10.20.2 0.0.0.0 8

( 2) 20 deny icmp 10.10.20.3 0.0.0.0 10.10.20.1 0.0.0.0 8 log

( 2) 30 deny icmp 10.10.20.2 0.0.0.0 10.10.20.3 0.0.0.0 8 log

( 1) 40 deny icmp 10.10.20.2 0.0.0.0 10.10.20.1 0.0.0.0 8 log

(10) 50 deny tcp 10.10.20.2 0.0.0.255 10.10.20.3 0.0.0.255 eq 23

log

(27) 60 permit ip 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255

Example of resetting ACE hit counters to zero

The following example uses the counter activity in Example 96 (page 152) to demonstrate using

clear statistics to reset the counters to zero.

Monitoring static ACL performance 151